fbpx

Best Table Saw in the UK for 2020 – Which One is a Cut Above the Rest?

Last Updated On June 18th, 2020

 

If you work with wood and other materials as part of your profession or simply as a satisfying hobby, it is fair to say that you will be aware how important using the best table saw is to your end results. An unreliable or inaccurate table saw can make the difference between a beautiful piece of work and one which is a complete waste of your materials and time. And for craftsmen, there is nothing worse than seeing many hours of hard work totally ruined, simply because the table saw wasn’t up to the job.

With so many tools on the market, settling upon the best for your individual needs and budget can feel rather overwhelming. After all, a table saw isn’t a throwaway, disposable item. These tools are an investment which should last you for many years. Luckily for you, we are here to help guide you through some of the top ones on the market today.

Best Table Saws Compared

Editor's Choice
Dewalt DCS7485N-XJ XR Flex Volt Table Saw Bare Unit, 108 W, 54 V, Yellow/Black, 210 mm, Set of 8 Pieces
Best Value
VonHaus Table Saw - Circular Saw Function 1800W 10” (250mm) with 5500rpm Underframe – High Spec with Attachable Table Sides – Make Longitudinal & Angle Cuts with Carbide-Tipped Saw Blade Fixable
Best Lightweight
Proxxon Micromot FET Table Saw
Best Multi-Purpose
Evolution Power Tools Fury 5-S Table Saw With Multi-Material Cutting, 1500W, (230 V)
Dewalt DCS7485N-XJ XR Flex Volt
VonHaus 1800W 10”
Proxxon Micromot FET
Evolution FURY 5-S
Power
1850w
54 volts
230V
1500w
Blade Size
210mm, 24 teeth
250mm, 24 teeth
10mm, 24 teeth
255mm, 24 teeth
Editor's Choice
Dewalt DCS7485N-XJ XR Flex Volt Table Saw Bare Unit, 108 W, 54 V, Yellow/Black, 210 mm, Set of 8 Pieces
Dewalt DCS7485N-XJ XR Flex Volt
Power
1850w
Blade Size
210mm, 24 teeth
Best Value
VonHaus Table Saw - Circular Saw Function 1800W 10” (250mm) with 5500rpm Underframe – High Spec with Attachable Table Sides – Make Longitudinal & Angle Cuts with Carbide-Tipped Saw Blade Fixable
VonHaus 1800W 10”
Power
54 volts
Blade Size
250mm, 24 teeth
Best Lightweight
Proxxon Micromot FET Table Saw
Proxxon Micromot FET
Power
230V
Blade Size
10mm, 24 teeth
Best Multi-Purpose
Evolution Power Tools Fury 5-S Table Saw With Multi-Material Cutting, 1500W, (230 V)
Evolution FURY 5-S
Power
1500w
Blade Size
255mm, 24 teeth

Top 7 Table Saw Reviews

Below, we examine 7 of the best table saw options in the UK which are suitable for everyone from DIYers to experienced professionals.

1. DeWalt DCS7485N-XJ XR Flex Volt (Editor’s Choice)

Dewalt DCS7485N-XJ XR Flex VoltA powerful and reliable machine from Dewalt, the DCS7485N-XJ XR Flex Volt is a fantastic piece of equipment for anyone with a passion for DIY. Despite a durable and versatile design, the Dewalt Flex Volt table saw is surprisingly lightweight. It comes in a set of eight pieces that are easy to assemble, and the whole kit is designed to be as portable as possible.

Features

There’s a steel roll cage to protect the saw against potential drops and knocks, which is ideal if you’re going to be taking your equipment to a job site. Additionally, the rack and pinion fence system enables you to get an extremely accurate cut every time. If you’re looking for a saw that’s precise and easy to use, this could be the perfect tool for you.

Ideal for chopping large sheets, the fencing solution on this saw provides 610mm of ripping capacity in a handy portable design. There’s also an overload protection system built into the machine to ensure powerful performance anywhere. On the downside, you do need a portable battery to go with this tool which means extra expense.

Pros:
  • 22kg weight with an optimal footprint
  • Steel cage to protect against drops and knocks
  • Rack and pinion fence system
  • Perfect for portability around job sites
  • Accurate and easy to use
Cons:
  • Quite expensive
  • Needs a battery

2. VonHaus 1800W 10” (Best Value)

The VonHaus 1800W 10Vonhaus 1800W 10” is our top pick when it comes to value for money. Offering a top-quality, carbide tipped cutting blade, powerful motor and extendable table, this saw is a perfect option for DIYers and hobbyists.

Features

It is extremely versatile. The 250 mm blade can cleanly cut a wide variety of common materials. MDF, hardwoods and softwoods are all easily managed with this saw, leaving a beautiful cut each time.

This table saw is capable of creating angled bevelled edge cuts, as well as longitudinal ones by allowing the adjustment of the blade head. A quick-clamp rip fence should ensure that the materials stay secured during operation, keeping the user safe while guaranteeing accuracy. Some users stated that the fence was a little flimsy, but not enough to render the unit unsafe.

When working with large materials, the table surface can be extended at each side as required. Therefore, if you regularly work on a range of projects, this should be multi-functional enough for your needs.

It also includes an effective dust-extraction port which limits the mess during cutting. This port can be easily attached to a dust bag or vacuum cleaner, making cleaning up after use quick and painless.

Pros:
  • 1800W motor
  • 250 mm carbide tipped
  • Extendable table
  • Dust extraction port
  • Creates longitudinal and bevelled cuts
Cons:
  • Replacement blades can be hard to source
  • Fence is a bit flimsy
  • Laminate clamp can be frustrating

3. Proxxon Micromot FET (Best Lightweight)

The Proxxon Micromot FETProxxon Micromot FET is a sturdy, lightweight yet powerful option for detailed woodworkers.

Features

Having a 10 mm, 24-tooth tungsten-tipped blade, this table saw is one of the best we have seen when it comes to fine adjustments and precise work. A set-screw allows the user to adjust the longitudinal stop by as little as 1/10 mm, perfect for meticulous work such as toy manufacture or mould construction. Although, some people found the fine adjustment mechanisms a little stiff.

The cutting depth is between 1 – 22 mm and it can also be tilted by 45 degrees to allow accurate angled cuts. Furthermore, if used in combination with the angle stop provided, it is possible to create double mitre cuts with little effort.

It is able to efficiently slice through a wide range of materials without trouble. Plastic, non-ferrous metals, wood, foam, and glass fibre are easily dealt with. All cuts are delivered smoothly without any need for refinishing. Saw blades sized between 50-85 mm can also be used with this machine if required.

Constructed from die-cast aluminium, this table saw weighs only 6 kg, but it is extremely stable. In fact, we think it is one of the best portable table saws available. The motor offers a low-noise drive; so you can work away without fear of disturbing the neighbours.

A dust extractor connection is included and works quite well. But, as the inner diameter is narrower than an average vacuum hose, it could be more efficient in design.

Pros:
  • Perfect for detailed work
  • Adjustable by as little as 1/10 mm
  • Lightweight
  • 10 mm, 24-tooth tungsten tipped
  • Can be angled to 45 degrees
Cons:
  • Fine adjustment can be quite stiff
  • Modification needed if you want to make shallow cuts
  • Dust extractor connection could be more efficient

4. Evolution FURY 5-S (Best Multi-Purpose)

The Evolution FURY5-SEvolution FURY5-S is another great machine from Evolution; suitable for both professionals and home craft hobbyists alike.

Features

It offers a 1500 W hi-torque motor, as well as an impressive multi-purpose 255 mm carbide-tipped blade for ultimate strength and durability. It is able to effectively cut through steel, plastic, aluminium and wood. Steel that’s up to 3 mm thick can be tackled without creating heat or sparks. The resulting steel cuts are free from burrs and therefore have an immediately workable finish.

It can do more than simply cut through a range of materials. This machine also gives users generous cutting versatility, enabling easy-to-achieve cross, mitre, straight and bevel cuts for a range of requirements.

It has a maximum cut depth of 85 mm in wood and can be tilted up to 45 degrees to the left to achieve bevel cuts.

Just like the previous Evolution RAGE 5-S saw, this also has a mitre gauge with a sliding carriage which offers angle adjustments of between -60 and +60 degrees. The attached clamp has anti-vibration properties, but some users felt the carriage and clamp felt a little loose.

On the other hand, the rip fence is able to be firmly secured in any position. Thus, providing peace of mind that every cut will be accurate and your hands will be safe. However, it is recommended you use the included push stick as an additional safety measure to avoid injury. Also, its rip capacity is expandable by 410 mm to the right.

As is expected, this also includes a dust extraction port, which can be easily connected to a vacuum cleaner to reduce mess. Although, it should be noted that some people found the dust collection wasn’t all that effective.

Pros:
  • 1500 W hi-torque motor
  • 255 mm carbide tipped
  • Cuts through steel, aluminium, wood, and plastic.
  • 45-degree tilt
  • Rip capacity expands by 410 mm
Cons:
  • Dust collection isn’t very effective
  • Sliding mitre is rather loose
  • Feels a bit cheap

5. Evolution RAGE 5-S (Best For Home Workshop)

The Evolution RAGE5-SEvolution RAGE5-S is our top pick for a home workshop. This impressive multifunctional table saw offers a formidable high torque motor, adjustable blade height and the ability to create super-accurate mitre and bevel cuts with the angled head.

Features

Supplied with this is a multipurpose 255 mm bore, 28-tooth blade. Thanks to unique RAGE® technology, it is able to cut through aluminium, steel, wood and plastic without breaking a sweat.

Moreover, in contrast to other units, slicing through steel is effortless. No heat is created during cutting and the end result has a ready to use finish, completely cool to the touch and free from burr edges.

If your hobby or profession often requires angular cuts, this won’t let you down. It has a tilt capacity of 45 degrees, performing beautifully accurate bevel cuts every time.

Furthermore, the mitre gauge with sliding carriage features positive angle stops from between -60 and +60 degrees so you can be sure each of your pieces will fit together perfectly.

It is designed to accommodate materials in a wide variety of sizes. The right side of the table is fully extendable, allowing an additional 655mm rip cut capacity for those larger pieces. Dust is quickly and efficiently extracted during use via a 1.8 m collection hose.

Should you be looking for a table saw which is easy to transport, this is a good choice. The unit is easy to fold and has a wheeled frame for optimal portability. However, some users still found the unit quite heavy and noted that it doesn’t fit through a standard doorway without rotation.

Pros:
  • 255 mm blade
  • 45-degree tilt capacity
  • Burr-free steel cuts
  • Extendable table
  • Mitre gauge angle stops between -60 and +60 degrees
Cons:
  • Heavy
  • Too wide for a standard doorway
  • No soft start

6. Einhell TC-TS 2025/1 U (Best Budget)

The Einhell TC-TS 2025 1 UEinhell TC-TS 2025/1 U is a great budget choice for both DIYers and professionals. Showcasing an incredible 1800W motor and 5000 RPM cutting speed, this makes short work of wood and fiberboard, as well as other materials.

Features

The carbide tipped 254mm blade makes longitudinal cuts effortlessly and can be adjusted to any angle between 0 and 45 degrees as required. Furthermore, the mitre gauge enables the user to easily make bevel crosscuts between -60 and +60 degrees, although customers said it sometimes felt a bit unstable. Both the angle and the height of the blade can be independently adjusted for ultimate cutting flexibility.

Should you need to work with particularly large pieces, it can be expanded on three sides to a maximum of 220 mm, thus allowing plenty of space to deal with panel boards or wide sheets as necessary.

Even at such an affordable cost, this cheap table saw has a base frame that offers a convenient working height, but it also feels sturdy and secure when presented with heavier materials.

A dust extraction port is included, as is a push stick with a dedicated holder, so it is always close by when needed.

Pros:
  • 1800W motor
  • 5000 RPM cutting speed
  • 254 mm carbide-tipped
  • Three side expandability up to 220 mm
  • Independent height and angle adjustment
Cons:
  • European plug
  • Mostly plastic
  • Mitre gauge can be wobbly

7. ParkerBrand PTS-250

Utilizing ParkerBrand PTS-250a 2000W motor with a 5000 rpm cutting speed, the ParkerBrand PTS-250 is a powerful choice capable of benefiting all users.

Features

This table saw uses a 24-tooth, carbide-tipped 254 mm blade, which makes clean cuts easily and quickly. The impressive 5000 RPM cutting speed is one of the fastest we have seen. Each cut is smooth and requires little-to-no refinishing.

Whilst the blade doesn’t tilt to allow bevel cuts like others we have reviewed, this does have a mitre gauge which allows for easy angled cuts. Once the gauge is secured in the correct position, it can create cuts across an angle range of -60 to +60 degrees. The height of the blade is easy to control using the hand wheel beneath the table.

With regard to the size, it can be extended to a total size of 64.2 mm x 938 mm which should be more than large enough for the majority of users’ needs. The aluminium rip fence is also adjustable and reaches around ¾ of the total table length. On the other hand, the stand is non-folding so this table saw isn’t as easy to store away as other models.

In terms of safety, it has a number of features to help avoid injury. A sturdy blade guard is included, as is an easy-to-reach on/off switch. Also, a riving knife is installed to prevent potentially dangerous kickbacks.

Pros:
  • Powerful 2000W motor
  • 5000 RPM cutting speed
  • 24-tooth carbide tipped
  • Riving knife safety feature
  • Adjustable mitre gauge for angled cuts
Cons:
  • Some found the instructions confusing
  • Blade doesn’t tilt
  • Stand doesn’t fold

Different Types of Table Saw

carpenter on the jobThe name “table saw” actually encompasses a number of different types of table saws. Below, we look at some of the most common ones.

Benchtop Table Saw

Benchtop table saws are the most popular entry-level table saws on the market. As the name suggests, they are designed so that they can be used on any flat benchtop or table which is sturdy enough to support them. They can be used with a stand, but these have to be purchased separately. These are lightweight and very portable.

Cabinet Saw

Cabinet saws are the most powerful, largest and heaviest table saws. These tend to be used by trade professionals, but may be used by dedicated hobbyists and DIYers too.

These have a highly durable table top and are usually extendable from one, or both sides, to allow for larger materials. They are designed to be long-lasting and can withstand regular heavy use. As a result, these are not considered to be portable.

Contractor Saw

Contractor saws are heavier and more powerful than benchtop saws, but they are still a portable option. These saws have an attached stand which is often wheeled to enable easy movement from one site to another.

They also tend to be compatible with many different components, so users’ have more freedom to customise the machine with readily available parts.

Things To Look For When Buying A Table Saw

Now, we have seen the different types of table saw available. Whether you plan on making a DIY sofa bed or doing a home renovation, there are some things you should always look for when choosing a table saw.

Blade

table saw bladeIt’s little surprise that the blade is perhaps the most important consideration to take into account when choosing a table saw. After all, this is the component which will be doing all the work.

Most table saws will come with carbide or tungsten tipped or coated blades. This increases the strength and durability of the blade and increases the quality of the cut.

Some blades are more suited for cutting wood rather than steel, while others are multi-functional and capable of cutting many different materials to a high standard. The best blade for you really depends on what you are planning to use your table saw for.

If you are only planning to use it for woodwork, a wood blade will suffice. On the other hand, if you are using it for trade and will be encountering many different materials, you should go for a blade which is able to effectively handle them all. It is usually possible to change the blade to suit the material being cut, but this can become quite a hassle if you have to do it often.

Furthermore, the versatility of the blade head is crucial if you wish to make angled cuts. Most table saws will have a blade head which can tilt in one direction to allow bevel cuts, but some more basic models may not.

Fence

The fence is a metal barrier which lies parallel to the edge of the saw table and blade. Its purpose is to behave as a fixed resistance point for straight cuts, against which you place the edge of the material to be cut.

The fence can usually be adjusted by sliding it along a measuring gauge on the edge of the table top so that you can set the width of the piece you need to cut. They can also often be removed completely if necessary.

Mitre Gauge

Just like the fence helps the user to create a straight cut, the mitre gauge allows the user to more easily and safely make angled or cross cuts into the material.

This component is settled into a track on the tabletop, within which it is able to slide up and down parallel to the blade. It consists of a measuring guide and a lockable, rotatable, half-moon shaped section which the material is rested against for cutting. A mitre gauge can usually pivot as far as 45 degrees to the left and right.

The available degree of rotation will be important if you are going to be using the saw for a variety of cross cuts.

Safety Features

Last, but by no means least, are the safety features. If you value your digits, which you should, then you will want to be keeping them attached to you. Table saws are dangerous tools and we should take precaution to prevent injuries.

Make sure that the table saw you purchase at least has an easy-to-reach off switch, a blade guard and a push stick. If possible, choose a model which also incorporates some protection against kickbacks too, such as a ‘riving knife’.

Choosing the Best Table Saw

Choosing the ultimate table saw for your needs means considering what to do with your new equipment. Are you searching for something that you can take with you to a job site or do you just want a tool that’s comfortable to use at home? Maybe you need something that will help you to cut through particularly tough pieces of equipment?

These table saw reviews have been carefully put together to cater to such needs and individual preferences. However, our favourite option from this list has to be the Dewalt DCS7485N-XJ XR Flex Volt table saw. This powerful yet portable machine gives you everything you need to cut through a range of materials. Plus, you can use it on the go. If you have a passion for DIY or you work on different sites for a living, this tool is sure to give you the results that you want.

The portable design even comes with extra protections in place to ensure that you continue to get accurate cuts after knocks and bumps. So, if you’re looking for the best table saw for the money, the Dewalt DCS7485N-XJ XR won’t disappoint.

What’s your favourite table saw on the market today? Let us know in the comments below.

Additional Resources

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up for exclusive discounts and product giveaways!

100% value and no spam, always.

You have Successfully Subscribed!